How to remove a laminate backsplash pull the laminate.
Remove laminate counter backsplash.
Slide the putty knife along the.
Don t worry about tearing the paper.
Work the end into the seam between the counter and the lower cabinet hammering the end to wedge it in further if you need to.
Remove the laminate covering.
Pry the buttons or.
Slowly i pulled the backsplash away from the wall.
So if you remove the outlet plates that s usually a good place to start.
Place a piece of masking tape over the marked line where you will cut.
Once you are sure they are all gone remove the laminate piece completely.
Use a drill to remove the screws and then the countertops should lift right off.
Peel back loose portions of the laminate backsplash or pry some of the backsplash away from the wall.
Remove the granite backsplash with a heat gun shims and a hammer.
Mark the area that you want to cut on the laminate backsplash with a pen.
Use hammer to knock the back to remove laminate from the wood.
The biggest problem is probably just getting started.
Remove any furniture buttons on the face of the backsplash to reveal screw heads.
Then i put my crow bar wonder bar in between the wall and backsplash again slowly pushing the laminate away from the wall.
If your countertop is secured with glue instead you will have to work it loose from the adhesive using a pry bar.
Next i put my puddy knife in between the wall and the backsplash.
Place crow bar or straight edge between the laminate backsplash and the wood.
How to cut off a laminate formed backsplash step 1.
Unscrew the board from the wall.
Line an additional piece of masking tape.
The best way to remove a countertop s backsplash laminate lift.
Extend a measuring tape to create a.
But don t dig into the gypsum.
A thin 4 putty knife and a hammer will often help you separate the laminate from the drywall.
Tap the end of the putty.
Force a putty knife vertically down between the backsplash and the wall.